How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add the second key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then a new key and transponder are required to be purchased and then programmed into the car.
It is an excellent idea to rotate your keys in order that one does not get damaged faster than the other. This will also keep your keys in pristine condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the latest key fobs have electronics inside which makes it hard to make a copy. This has made car theft considerably more difficult than it was years ago. It has also made it more costly to replace keys that were lost.
Saab 9-3 owners must have two working keys. If one of them is lost, it costs a fortune to get another one for the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100-$200 for this.
There are ways to reduce the high cost. Some parts dealers will use the code of an old key to cut a new metal blade for a fraction of the price of the dealer. The key must be the exact same as the original in order for it to function in your vehicle.
Follow these steps to replace the case. You'll require a flathead screwdriver along with some patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once the case has been opened take out all electronic components and place them into the new case. Place the key with the correct badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the battery for the remote key fob in only four steps. This tutorial will work with any modern Saab key fob. However, the procedure may differ slightly.
This button is usually located near the Saab logo on the back of the fob. This button is usually on the back of the fob, next to the Saab Logo. Then use a flathead screwdriver to insert into the small hole inside this button. This should be enough to unlock the fob's case so that you can replace the battery.
After you have installed the new battery CR1632, you are able to reassemble your remote key fob. You can then program it into your car. The entire process should not take more than an hour. This is a simple process that doesn't require any special tools.
If you lose a key, the procedure will be slightly more complicated, but it can still be done. The dealer must first read the VIN of the vehicle and order the replacement TWICE module as well as key blade that is matched to the unique code. The dealer will then have to program the key using MDI which is a new software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car, it's got batteries inside. The batteries are able to last for and will eventually die. This is a typical issue that occurs with all vehicles and the good thing is that you can change the batteries in many fobs, without replacing the entire case. Amazon sells replacement fobs that have all the electronic components installed. You can simply open the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, place a small flathead screwsdriver into the slot that is in the middle of the. The screwdriver should be moved around the case, and it will split open, making it easy to take it out.
If you are about to replace the keys, make sure you have spare keys, as this can reduce your total cost by a significant amount. If you have an additional key, you can request the dealer to cut the key and program it for your vehicle. This is much less expensive than purchasing a new key fob.
It is possible to add a second key to your vehicle even if you don't have one, however it requires an extensive amount of research and work. It can cost a few hundred bucks to add a second car key. The computer of the vehicle must also be programmed. This can be done by a professional, but it is an expensive option for the majority of owners.
Replacement Ignition
The modern SAAB 9-3 features an alarm system that is more sophisticated that is based on a key code. saab key fob programming means that when you lose your sole functioning key, getting an additional one could be extremely expensive because the car needs to have a specific computer module added and it also must be specially programmed to accept an additional key. Most locksmiths can't do this and dealers can charge several hundred dollars just to program the new key!
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make a replacement, and will charge you a premium price for it. Instead we can reprogram the EEPROM on your existing car computer to allow it to be programmed for a replacement key, saving you over 50% of the amount you be charged at a dealership.
If you have owned a 9-3 from SAAB for many years and you're aware of the ignition keys are not very durable. They can get extremely sticky and the buttons are known to be ripped off every now and then which is why you should think about buying a new one if the one you have isn't performing as it should. It's not so difficult as it may seem to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.